Wall mounted Bed head unit designed to meet requirements of different hospitalization areas, for one bed, with possibly forming continuous lines for several beds.
Made with extruded aluminium profiles and painted with epoxy-polyester in RAL colours, impact and cleaning products resistant.
Its design gives impression of reduced volume, highly integrated, optimal use of internal space, absolute priority to functionality, ergonomics and maintenance.
The ARDYS system allows the installation of Electricity and gas sockets in accordance with international norms and standards with possibility of different combinations due to its flexible inner design.
Different colours combinations. Lighting diffusers are made in polycarbonate.
End caps made of Injected aluminium or high quality steel.
Access to inner parts of the Bed head unit is done by clipping system covers to avoid the visible screws.
Bed head unit fixed to the wall by steel plate and screws (included). The access to electrical connection and gas pipes are performed through cutouts located on the rear of the aluminium profile. Optionally the access can be also through the end caps.
Electrical sockets: located on the front side of the BHU, usually 16A/230V schuko standard, other standard also possible as required.
Equipotential Earth connection: located on the front side of the BHU, as required.
Gas outlets: located at the front side of the BHU, different standards available (DIN, BS, AFNOR, DISS,..), quantity as required, also possible to deliver only with cutouts for installation of gas outlets on site (Hospital).
Ambient Light: set of one or two T5 bulbs or LED strips located on the upper side of the BHU.
Reading Light: set of one or two T5 bulbs or LED strips located on the lower side of the BHU.
Night Light: set of one T5 bulb or LED strips located on the upper side of the BHU. See figure.
Nurse call systems, phone sockets, medical rail (30x10mm) located on the front side of the BHU covering the whole length of the BHU or only a part.